The Auto-Disc Model GF-202
- Applications: Injection Molding, Injection Blow Molding or Extrusion
- Components:Two. One Metered Ingredient, One Flood-Fed Natural.
- Capacity: 2200 lbs per Hour (1000 Kilograms Per Hour)
- Feeder handles all pellet types (including micropellets) and regrind
- Recovery Time Tracking and Timer Mode sychronizes the unit with your Molding Machine
- Integrated weigh scale system with push-button calibration for additive feeder
- Material low level sensor with audible alarm
- Rugged clear additive hoppers
- Removable top housing for quick and easy material changeover
- Control box with an easy to read 80 character LCD display, operates up to 4 components w/ loaders
- Microprocessor stores up to 250 recipes that can be edited and loaded by computer
- Event History feature records the last 76 events over 72 hours
Auto-Disc™ Central Vacuum System
The Plastrac Auto-Disc™ Central Vacuum System is powered by a 1.5 HP brush-type (CB-100) or 2.0 HP Brushless- type (CB-200) vacuum motor and loads material for up to four components.
Material Loaders
Material Loader Hoppers for the mini-central vacuum system contain level sensors that automatically trigger the system to load. The system is operated from the unit's control box.
Spare Top Units
Spare top units may be utilized for even speedier material changes. The top unit is easily removed and seals allowing material to be stored in the hopper.
Visual Alarm Strobe
The Visual Alarm Strobe compliments the audible alarm. It is especially ideal for louder environments.
Stainless Steel Hoppers
Durable Stainless Steel Hoppers are available in 9", 12" and 16" diameters. These Quick release material hoppers easily tie into central loading systems or can be fitted with a Plastrac material Loader as well as 3rd party systems.
Extrusion Tachometer Follower
The Extrusion Tachometer Follower Module reads the RPM from the extruder screw and adjusts the material feed rate accordingly to provide the right amount of material to your extruder.
